The Pace Di4000T was released in 2002, 3 years after active digital had originally laucnhed, annd was a new generation of digital set top boxes.
Like it’s ntl counterpart, certain features were cut in this version in an effort to reduce costs for the cable company.
Looks just like the Di4000N, with the main difference being the large Broadcom chip to the left
The main difference is the removal of the second card slot, it remainted in the Telewest version until the Di4000TC
The Di4000T is powered by the Conexant CX22490, same as the Di4000N and is paired with 32MB of memory
Broadcom BCM3250KPB, DVB demodulator and cable modem controller.
Another view, this time with the chips cleaned
Additional space for more flash memory
Front panel with the cover removed, the Di4000T has the same front panel as the Di1000/2000 series
Rear panel, exactly the same as the ntl version
Software Version: 3.7.37.P12EN.P.KNOW.P4000.R
Displays the default frequency for the local area
Shows the NetID and the different address used to identify the box, also shows the build of the software
Return path information
Date & Time information
Rf output settings, here you can change the output channel and the colume control
Smart card status
Shows the different images stored in the flash memory
Memory and Flash memory capcities
Reboots the STB, not sure why cold reset is not avaliable
Status monitoring, List of errors and notifications logged by the STB
Shows signal information for the chosen frequency and symbol rate.
Same as the previous screen but with the cable modem downstream
Signal information for the DOCSIS modem upstream
When the box can locate a valid transport stream (multiplex) it shows the details of the DVB-SI, the amount of services found
Information relating to the flash memory