Tag Archives: Nagravision

ntl CR3 Pace Di4000N

Ntl Bromley CR3

The replacement to CR2 software that saw the launch of interactive services for the bromley platform, CR3 saw a rewrite of the guide software, with everything now being written in the Liberate browser, and Two Way TV support for downloadable applications, whilst Liberate being used for interactive. This software would form the basis for Langely CR3, and would be the next step in unifying the platforms in terms of feature set.

Sadly not all areas had access to CR3 with former Videotron areas in London being stuck on pre-interactive CR1 blue to the networks inability to support a return path connection. ntl would have to upgrade and repull the network in order to provide support for broadband and on demand services, all of which are dependent on a return path.

The software here is running on a Pace Di4000N

ntl home screen

The user interface of ntl digital, not a fan of their purple/pink colour scheme and the bad thing is that its everywhere, thankfully they changed the scheme by the time it can to Langely.

Interesting is the listing for interactive settings, rather than be part of the list it looks like a separate link,

Now & next

Unfortunately the purple makes it’s way onto normal viewing, with the now and next bar

I’m not sure why these early cable TV software did not allow for the volume to be changed via the STB remote, since the Telewest side also did not support changing the volume. One theory was that customer would complain to ntl about how they were unable to her any sound through their TV, unaware that the volume on the analogue box has been set to a low level or mute, so to prevent further calls that disabled the feature.

In the end they enabled the volume control in a later build ofCR3, along with Telewest. Maybe they got fed up of the support calls asking why the volume control isn’t working on their box. In hindsight they should have followed the Sky design where the STB remote controls the volume on the TV at launch (they ended up doing this later, with the newer remotes)

The options button gives a small menu, allowing for access to the help function and a shortcut to the diary. The audio Language lets to changed the language of the audio, or enabled narrative audio description, Sky would later implement a similar feature in its Sky Guide.

TV Guide

ntl tv guide

The main TV guide grid. No channels here since the box is not connected to the cable feed.

Here would have been a list of all channel genres, such as Movies, Sports, News, etc

Pressing the i button shows a short description of the program

TV Guide: Diary

The diary is ntl’s version of the personal planner, and is used to store reminders for future events and shows. Future PPV events appear here.

Subject Search

The subject search feature can be thought of as an alternative to the A-Z listings of Sky Guide, showing programs rather than the channels themselves. The idea is that the customer can find a program they like by the genre of the show.

Sadly the TV guide only has 3 days of TV listings, compared to the 7 days offered by Sky Digital.

A list of subgenres

Searching for a specific program via text

The on screen keyboard, not sure if this is the way it’s supposed to look since a lot of the text to the right being cropped off.

ntl customers could also purchase an optional keyboard to make it easier to enter text.

ntl subject search

One nice feature is the ability to save personalized genre lists, here you choose the type of programs to like to see and you can easily search for that list without having to manually select categories.

Interactive

ntl interactive

Trying to load interactive services which sadly no longer exist. the Liberate middleware was used to deploy the interactive microsites, with the TwoWayTV middleware being used for the interactive applications such as games.

On Demand

Looking for PPV events, this was before true video on demand had launched

ntl on demand

Settings

ntl parental control

The parental control feature

Changing TV settings, not sure what Enhanced Programming corresponds to?

Favourites

The favorites feature, very similar to Ntl Langely CR3

Help

ntl help cr3

There’s a help system but with no content stored on the box.

Diag Screen

Diag screen that shows the software an signal information

ntl error

Using with Virgin Media

Somehow I was able to get the box to bootup on a modern Virgin media connection, with many Channel and TV listings being loaded. Sadly I was not able to get any TV channels to load, not even radio channels which still broadcast in MPEG2

Virgin Media TV Guide

Former Telewest/Virgin Media box used for standard definition TV Services.

Starting up…

Sadly the NetID for this box does not match my area, which means channels cannot be watched. Virgin have migrated their streams to MPEG4 anyway which this box cannot decode, however radio channels remain in MPEG2 although they are tied to the NetID which is why they don’t appear here.

The now and next banner that appears when you change channels. If you are used to Sky’s interface you will be familiar to how Virgin’s guide works since it’s mostly the same principles. Left and Right lets you browse the different channels, which unlike Sky will automatically filer out unsubscribed channels, and you can view information for all channels for the next 24 hours

When you remove the smartcard from the set top box

The main home screen, typically the channel you are watching appears in the box to the right. You can’t do that on a regular Sky Digibox. From here you can also access the on demand and catch services, which at the time would have consisted of BBC iPlayer and content from ITV and Channel 4. For a brief period Virgin also offered box-sets in the form of Virgin Central which could be accessed like a regular channel

Channels can be divided into multiple genres. Oddly there’s a high definition section there, despite the box lacking the ability to decode HD channels.

The main TV guide screen

Setting a reminder, similar to adding a programme to the personal planner on Sky

The favorites guide, channels you mark as favorite appear here

The reminders section, similar to the personal planner on Sky Digital

Sorting channels by genre

Settings

Box supports RGB and composite over scart, and has a widescreen option. The EPG does not run in widescreen mode however.

OnDemand and Interactive

Press F to pay Respect… or OK. I guess most of the liberate interactive stuff has been removed

General Use

For years Telewest customers were promised the launch of digital text services that could be activated by the text button. Eventually they just gave up

Help

Pressing the Help button brings up a short guide that mentions most of the common features

Earlier Build

Diag Screens

Kind of like the BIOS of a PC where you can change certain settings like the default frequency. To access it hold down the Up and Down buttons on the front panel of the box whilst it is booting up (whilst -un- appears on the front display). DIAG will then appear on the front

The only thing you can change here is the default frequency parameters. and the RF output.

Inside the box

I’m not sure how similar our 4200DVB is to the American version of the 4200. I guess the CPU chip set might be the same but the software will defiantly be different, since Scientific Atlanta have their own Operating System and middle-ware stack, whereas Virgin use Liberate TV Navigator for their software. Then there’s the DOCSIS modem compared to the DAVIC based one in the American version, and the different encryption systems (Nagravision vs PowerKey)

The internals are similar to the Di4000. One thing I have noticed with Scientific Atlanta boxes is they always mount the PSU on the side. I’m not sure if this allows for better heat dissipation since there are vents underneath the box. The tuner module is huge and takes up a lot of room on the main board.

The CPU (right) with the cable modem coprocessor (left). The CPU seems to be a customized chip for Scientific Atlanta and is designed by ST. This may indicate the CPU core being ST20 based, since many ST chips used that core in various satellite receivers, including Sky Digibox’s. As with modern designs, the main processors integrates the CPU, MPEG2 decoder, CA descrambler and graphics core on the same chip. In terms of memory, the box has 32MB of RAM and 8MB of flash, same as the Pace Di4000T.

The IO is standard for many cable boxes of the era, although this model drops the USB port, and the RF loop through has been removed. The earlier Pace Telewest boxes had an RF loop through that would modulate the STB signal onto a spare RF channel, whilst this box does the same, you cant loop the antenna feed through it, wither a combiner or diplexer device would be needed. Assuming you even wanted to use RF, most customers would use the scart connecter with the RF being used to feed a second TV. I’m not sure if the box feeds the analogue cable channels though the RF out, but since this box was released in 2004 and Telewest were already planning to shut of the analogue feed it’s unlikely.

At least there’s an Optical audio out along with analogue out, which the Di4000 boxes dropped, and the mysterious IR blaster connector.

Front view of the STB, the panel is based on the Scientific Atlanta 4250 design.

Updating System Software

To force a software update, power off the box, hold Power and Ok whilst powering the box on

It’s nice they used Wordart in their software update screens

ntl Langely CR3 Di4001

ntl: CR3 Langely

A look at ntl’s CR3 software for the Langely Platform

CR3 was ntl’s long awaited upgrade for their Langely customers who had previously no access to any interactive services, unlike the Bromley division that had full interactivity for some time. Part of this was due to the different return path technology used, ntl had originally went with DAVIC compared to Telewest and Cable & Wireless who deployed the DOCSIS standard for their TV return path. Although they are similar in terms of functionality, the differences meant ntl could not adapt the Cable & Wireless software for the Langely platform. In addition, Langely areas also ran different software with the original EPG being provided by Pace with the Liberate 1.2 browser being installed. CR3 would see a rewrite of the entire guide with everything now being done in Liberate, this meant that the Liberate browser was loaded on start-up, unlike earlier versions where the user had to wait for the browser to load.

CR3 saw a drastic change in the user interface, with the new ntl colour scheme being adopted

Screenshots below shows the stb without any channels loaded, I have to force boot the stb by holding they down key until Boot came up on the front panel display. Sadly I was unable to get the box to load with the cable feed.

Now & Next

ntl now next
ntl CR3 mini guide
With alternative colour scheme enabled

TV Guide

ntl CR3 main menu

The main user interface layout, you can see the Sky Guide influence with its layout

Viewing all channels, this would be populated with all subscribed channels, unfortunately the STB does not pick up any channels, either it cant load the NIT or the tuner inside the box is knackered

Viewing channels based on genre, up to 7 channels can be displayed at any time

Diary function, this is like the Personal Planner on Sky Guide, you can schedule future programmes to be entered here. Unable to test further since the box can’t load any programmes

On Demand

Ntl revamped replace its PPV service with a full on demand service, the programmes ordered could be watched easily. This software seems to be from before on demand was implemented as despite the menu saying ‘On Demand’ the box shows PPV options instead.

Interactive

Not functional 😦

Settings

Rearrange Channels

ntl had the ability for the customer to rearrange the channels in their EPG, allowing for channels to have their own number. This feature was removed when they migrated over to the Telewest based UK1 software

ntl CR3 change channel numbers

I can soft of understand why the feature was cut, in a family household one could easily rearrange the channel numbers which would cause issues with other members trying to figure out the channel numbers, and probably resulted in increased support calls from customers trying to figure out what had happened to their channel list.

ntl CR3 video

Changing the picture settings

ntl CR3 audio

Never seen this before with digital TV, the ability for the box to sound an alert, with Sky boxes you can only sound a beep, and that’s only if there’s an error or if there are subtitles on programme being watched. Three alert sounds are available. Sadly this feature was cut when they migrated to the Virgin UK1 software.

Parental control PIN

Favourites

Favourite channels can be viewed in a list form the channel banner

Listings for favourite channels can also be viewed whilst watching a channel.

Error Messages

These were common back in the day 😉

di4001 start up
Firmware Update, also appears when the STB is booting
Di4001 error message
No listings loaded
No signal being received
No Smartcard

Network Status

Press Page Up, Page Down and then Blue to access